Connexion kit for unlocked Numworks

• Detect the Numworks. Click it if the buttons below do not work. If your N0110 calculator screen is off, click on the Rescue button instead.
• Numworks→ or Backup→ : Python scripts from the calculator or from a backup.
• Backup : save all scripts from the calculator.
• →Numworks : send a script (.py extension) or restore a backup (.nws) to the calculator.
• KhiCAS install (2021/10/17): on your N0110 calculator Documentation, Licences (French), Source.
• Customize flash (Khi must be installed)
  Init from calculator→ or KhiCAS or ou Clear
  Add files:

  ---

  ---

  Install or save customization.
• Install or certification progress

  ---

  ---

• If you want to certify that a N0110 calculator firmware is a genuine version of KhiCAS, click on one of the two buttons.
  Certification Certification + R/W test
  First test takes about 15 secondes, the second one is more secure but it takes about 1 minute and it writes data on the calc. These tests may be done by a proctor during an exam with a smartphone from this link using a smartphone-Numworks link.
• Rescue : Click here if your N0110 is stuck.
  Connect the calculator, press the 6 key, enter a pin in the RESET button on the back (keeping 6 pressed), release the 6 key. The screen should remain black, while the red led is visible.
  If you see http://... tries to connect, click on STM32 BOOTLOADER then click on Connect.

• If the calculator is on and the calc does not display "Calculator connected", unplug and plug the calc
• If the calculator is on and the calc displays "Calculator connected", try the Detect button.
• If the calculator is off even after unplug and plug, try the Rescue button